The H.15 Handpiece has hammering rather than rotary action for use by metalsmiths for stone setting and decorative work. Comes with a single round tapered anvil point with flat top, ready to be modified before use.
Hammer handpiece has a 1/32″ stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring.
For use only at low speeds (0-5000 RPM). Recommended motor is the LX, which has a matching maximum RPM, available HERE.
This handpiece requires periodic lubrication with oil available HERE.
Use with Anvil Points available HERE.
The H.15 Handpiece has hammering rather than rotary action for use by metalsmiths for stone setting and decorative work. Comes with a single round tapered anvil point with flat top, ready to be modified before use.
Hammer handpiece has a 1/32″ stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring.
For use only at low speeds (0-5000 RPM). Recommended motor is the LX, which has a matching maximum RPM, available HERE.
This handpiece requires periodic lubrication with oil available HERE.
Use with Anvil Points available HERE.
